How to do WiFi Repeater 192.168.10.1 Setup

In this pandemic time, the actual importance of the internet has come into the picture. Now, the study is online, the work from home is there for the working people, and many businesses have turned their way to e-business. Hence, if you are in a poor network area, then it is going to create a problem, and it may lead to misinformation about the important thing. So, in this case, the use of a WiFi Repeater has come into play. But, in order to do so, there is a need to do the configuration using WiFi Repeater 192.168.10.1 admin Setup if the IP address of your repeater or your WiFi network is 192.168.10.1.

  • Wireless and repeater setup using GUI

  • Repeater mode with the help of Ethernet Cable

  • With the use of AP mode

  • With the use of WPS

WiFi Repeater 192.168.10.1 Setup

192.168.10.1 Login using GUI

  • Connect the repeater to the electrical outlet. Turn the switch on. The light for the repeater will light up in green color.
  •  Now, connect the system to the repeater with the use of the ethernet cable.
  • Now, with the help of the WiFi connection settings manager, look for the name, “Wireless N or WIFI repeater” for connecting it to the network.
  • After that, launch the web browser, type the URL 192.168.10.1 in the address field, and press the Enter button.
  • So, it will make you land on the admin panel page. Enter the credentials. The username is “admin”, and the password will also be “admin”.
  • On opening the dashboard, select the repeater icon, and enter the required detail for the repeater’s network.
  • Wait for around 1 minute, your new repeater’s network name will appear in the list of the WiFi network, and you can connect it with your device in the poor network area.

 192.168.10.1 Configuration using Ethernet Cable

WiFi Repeater 192.168.10.1 Setup using Ethernet CableIn case, you are having some problem with the wireless network, then you can log in with the help of a wired connection, that is, with the use of an ethernet cable. In order to do so, you need to follow the steps given below:

  • Connect both the devices i.e. system and repeater with the help of an ethernet cable.
  • Now, you will start the web browser of your choice, type the URL 192.168.10.1 in the address field of the browser, and tap Enter.
  • Now, enter the default credentials, or the credentials that you have set beforehand.
  • After going to the dashboard screen, select the repeater icon, and select the name for your repeater by entering the SSID for your network.
  • Now, you will find that name in that name in the list of the available WiFi network, and you can connect your device to it in order to have better network access in the weak signal area.

WiFi Repeater 192.168.10.1 Setup using AP Mode

  • In this method, you have to connect the repeater with the ethernet cable, and also connect the existing WiFi router with the ethernet cable.
  • Now, you will launch the web browser of your choice like Google Chrome and, type the URL 192.168.10.1 in the address field of the browser, and tap Enter.
  • So, it will open up the admin panel page. Enter the credentials. The username is “admin”, and the password will also be “admin”.
  • Now, on the dashboard, select the “AP mode” instead of the Repeater icon.
  • Now, similar to previous methods, select the name for your repeater’s network, and then you will wait for some time to appear in the list.
  • It used to take around 1 minute for the complete setup. Now, in order to confirm this, you can try to connect it with your device from the region where there is no proper access to the signal earlier.

Setup 192.168.10.1 using WPS Button

When you have to set up the repeater by using the WPS button. 

  • In order to do the setup using the WPS button, you must keep the router and repeater in the same room, like at a distance of 5-10 feet.
  • Switch on the extender or repeater in the electrical source, and turn on the switch of the repeater.
  • Push the WPS button for the both-existing router and the repeater. First, push the WPS button for the existing router, and wait for the light to blink. Once, it will blink, then push the WPS button for the repeater after 2 minutes and wait for the light to blink. Now, it will take around 20 seconds.
  • If both the lights have turned into a solid color, then it means, both the devices are connected now, and you can use it for connectivity in the area having poor access to the network.

Enjoy the Speed!

Now, with the setup of the WiFi repeater using 4 ways, you can use it freely if you are having any issue with the speed earlier. It means you can enjoy the speed properly of your existing network and can continue with the work, without any distraction because of the network.